When the System Does Not Seem to Work Properly
The rear vision camera system might not work properly or display a clear image if the following occurs:
- It is dark.
- The sun or the beam of headlamps is shining directly into the camera lens.
- Ice, snow, mud, or anything else builds up on the camera lens.
Clean the lens, rinse it with water, and wipe it with a soft cloth.
- The back of the vehicle is in an accident. The position and mounting angle of the camera can change or the camera can be affected. Be sure to have the camera and its position and mounting angle checked at your dealer.
- There are extreme temperature changes.
See also:
Tire Terminology and Definitions
Air Pressure: The amount of air inside the tire pressing outward on each
square inch of the tire. Air pressure is expressed in kPa (kilopascal) or psi
(pounds per square inch).
Accessory Weight: ...
Selecting an XM Channel
XM channels can be selected by using SEEK, SEEK, the TUNE
knob, or the menu system.
Selecting a Channel Using SEEK or SEEK (Radio with CD)
- Press and release SEEK or SEEK to go to the
previou ...
Parking on Hills
WARNING
Parking the vehicle on a hill with the trailer attached can be dangerous. If
something goes wrong, the rig could start to move. People can be injured, and both
the vehicle and the tr ...