Engine Cover
Engine Cover (CTS)
To remove:
1. Remove the oil fill cap (A).
2. Raise the right front corner of the engine cover (B) to release it from the ball stud.
3. Pull the engine cover (B) forward to slide the rear tabs (C) out from under the retainers.
4. Lift and remove the engine cover.
5. Reverse Steps 1 through 4 to reinstall the engine cover.
Engine Cover (CTS-V)
To remove:
The engine cover consists of two pieces. Only the larger front piece needs to be removed to access the engine oil and power steering fill caps.
1. Raise the front of the engine cover (A) to release it from the ball studs (B).
2. Pull the engine cover forward until it is clear of the smaller piece.
3. Lift and remove the engine cover.
4. Reverse Steps 1 through 3 to reinstall the engine cover.
See also:
Keyless Locking
The doors lock after several
seconds if all doors are closed
and at least one keyless access
transmitter has been removed
from the interior of the vehicle.
To customize if the doors
automat ...
Dual Mode
This dual screen symbol displays when the screen is in dual mode.
Dual mode displays the route on half of the screen and a maneuver or Interstate
Exit list on the other half. The Interstate Exit ...
Average Vehicle Speed
The Average Vehicle Speed display shows the average speed of the vehicle in
kilometers per hour (km/h) or miles per hour (mph).
This average is calculated based on the various vehicle speeds recor ...