How to Inspect the Engine Air Cleaner/Filter
To inspect the air cleaner/filter, remove the filter from the vehicle and lightly shake the filter to release loose dust and dirt. If the filter remains covered with dirt, a new filter is required.
To inspect or replace the engine air cleaner/filter:
1. Turn the ignition off.
2. Remove the side cover by pulling up on the front of the cover.
3. Disconnect the electrical connector from the air box.
4. Loosen the screw on the clamp holding the air outlet duct in place. Do not remove the clamp.
Move the duct aside.
5. Remove the hose from the air cleaner housing mounting arm.
Move the hose aside.
6. Remove the three air cleaner housing cover screws.
7. Move the air cleaner housing cover and remove the cover from the air cleaner housing.
8. Remove the air cleaner filter from the air cleaner housing.
See also:
When Should an Airbag Inflate?
Frontal airbags are designed to
inflate in moderate to severe frontal
or near frontal crashes to help
reduce the potential for severe
injuries mainly to the driver's or
outboard front passen ...
SBZA Messages
The following messages may
appear on the infotainment display:
SIDE BLIND ZONE ALERT
SYSTEM OFF: This message
indicates that the driver has turned
the system off.
SIDE BLIND ZONE ALERT
SYS ...
SERVICE SUSPENSION
SYSTEM
This message displays when
there is a problem with the Magnetic
Ride Control system. See Magnetic
Ride Control for
more information. Have the vehicle
serviced by your dealer. ...