Washer Fluid
What to Use
When adding windshield washer fluid to the vehicle, be sure to read the manufacturer's instructions before use. If you will be operating your vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing.
Adding Washer Fluid
The WASHER FLUID LOW ADD FLUID message will appear on the Driver Information Center (DIC) when the fluid level is low.
See Washer Fluid Messages for more information.
Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview for reservoir location.
Notice
. When using concentrated
washer fluid, follow the
manufacturer's instructions
for adding water.
- Do not mix water with
ready-to-use washer fluid.
Water can cause the solution
to freeze and damage the
washer fluid tank and other
parts of the washer system.
- Fill the washer fluid tank only
three-quarters full when it is
very cold. This allows for
fluid expansion if freezing
occurs, which could
damage the tank if it is
completely full.
- Do not use engine coolant
(antifreeze) in the windshield
washer. It can damage the
windshield washer system
and paint.
See also:
Safety Locks (Sedan and Wagon)
The vehicle has rear door security
locks. These prevent passengers
from opening the rear doors from
the inside.
Lock Label shown
The rear door security locks are
located on the inside edge ...
Cellular and GPS Antennas
Avoid placing items over or near
the antenna to prevent blocking
cellular and GPS signal reception.
Cellular reception is required for
OnStar to send remote signals to
the vehicle. ...
Handling
The ATS' handling is the car's claim to potential fame. Several Cadillac
models have been introduced since the 2003 CTS sedan set the company's new tone
for world-class athleticism, yet none has c ...