Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.
- The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).
- With the key access ignition system, the ignition key should come out only in LOCK/OFF.
See Ignition Positions (Key Access) or Ignition Positions (Keyless Access).
Contact your dealer if service is required.
See also:
Brake Fluid
The brake master cylinder reservoir is filled with DOT 3 brake fluid. See Engine
Compartment Overview for the location of the reservoir.
There are only two reasons why the brake fluid ...
Conditions in Which Remote Start Will Not Work
The remote vehicle start feature
will not operate if any of the
following occur:
- The ignition is in any position
other than LOCK/OFF.
- A keyless access transmitter is
inside the vehicle.
...
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, outside
mirrors, and the power steering
column, if equipped, to the
desired driving positions.
2. Press and hold “1” until
two beeps sound.
3 ...