License Plate Lamp (Coupe and Sedan)
To replace one of these bulbs:
1. Push the tab to remove the license plate lamp.
2. Turn the license plate lamp assembly down to remove it.
3. Turn the socket counterclockwise and remove it.
4. Pull the bulb straight out to remove it.
5. Push the new bulb straight into the socket.
6. Reverse Steps 1 through 3 to reinstall the license plate lamp assembly.
See also:
Address Book
The address book entry method lets you select a destination by selecting an address
that has been stored in the address book.
Address Book: Press to access the
Address Book screen. From this s ...
Exterior Lighting
The exterior lamp control is
located toward the end of the turn
signal/lane change lever.
: Turn the band with this
symbol on it to operate the exterior
lamps.
The exterior lamp control h ...
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated:
- Press and hold the +RES button
on the steering wheel until the
desired speed is reached, then
release it.
- To increase vehicle speed in ...