License Plate Lamp (Wagon)
To replace one of these bulbs:
1. Open the liftgate. See Liftgate for more information.
Passenger Side Shown, Driver Side Similar
2. Push the left end of the lamp assembly toward the right.
3. Turn the lamp assembly down to remove it from the liftgate.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
4. Turn the bulb socket (A) counterclockwise to remove it from the lamp assembly (C).
5. Pull the bulb (B) straight out of the bulb socket.
6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly.
7. Turn the lamp assembly into the liftgate engaging the clip side first.
8. Push on the lamp side opposite the clip until the lamp assembly snaps into place.
See also:
Voice Pass-Thru
Voice pass—thru allows access to the voice recognition commands on the cell
phone. See your cell phone manufacturer's user guide to see if the cell phone
supports this feature.
To access contacts ...
Pairing
A Bluetooth—enabled cell phone must be paired to the Bluetooth system and
then connected to the vehicle before it can be used.
See your cell phone manufacturer's user guide for Bluetooth functions ...
The Inside
Like the second-generation CTS that introduced this era of Cadillac
interiors, the SRX's cabin is logically arrayed and a handsome bit of work. The
controls have decent quality, and the gauges off ...