Removal and Installation of the Sealant Canister

To remove the sealant canister:

1. Unwrap the sealant hose.

2. Press the canister release button.

3. Pull up and remove the canister.

4. Replace with a new canister which is available from your dealer.

5. Push the new canister into place.

    See also:

    Battery
    Refer to the replacement number shown on the original battery label when a new battery is needed. See Engine Compartment Overview for battery location. WARNING Battery posts, terminals, and r ...

    Install the Cargo Cover
    1. Hold the cartridge so that the pull-out shade faces the rear of the vehicle. 2. Align the cartridge over the pins on the trim panels of the vehicle. 3. Push down on the cartridge to snap i ...

    Tire Pressure Monitor System
    The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. The TPMS sensors monitor the air pressure in your tires and transmit tire pressure readings to ...