Protecting Exterior Bright Metal Parts
Regularly clean bright metal parts with water or chrome polish on chrome or stainless steel trim, if necessary.
For aluminum, never use auto or chrome polish, steam, or caustic soap to clean. A coating of wax, rubbed to a high polish, is recommended for all bright metal parts.
See also:
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides
of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back
approximately 5.0m(16 ft). The heigh ...
Checking Brake Fluid
Check brake fluid by looking at the brake fluid reservoir. See Engine Compartment
Overview .
The fluid level should be above MIN. If it is not, have the brake hydraulic system
checked to ...
Liftgate
WARNING
Exhaust gases can enter the vehicle if it is driven with the liftgate or trunk/hatch
open, or with any objects that pass through the seal between the body and the trunk/hatch
or lift ...