Place a Call Using a Stored Number
1. Push
. System responds:
“OnStar ready.”.
2. Say “Call <name tag>.”.
System responds: “OK, calling <name tag>.”
See also:
Hitch Cover (without Dual Exhaust)
The vehicle may have a hitch cover. To remove the hitch cover:
1. Turn the fasteners on the lower tabs 90 degrees counterclockwise.
2. Lift the lower edge of the cover about 45 degrees.
3. Pull t ...
Tire and Loading Information Label
Label Examp
A vehicle-specific Tire and Loading Information label is attached to the
vehicle's center pillar (B-pillar). With the driver door open, the label is
attached near the door lock po ...
Back-Up Lamps
To replace one of these bulbs:
1. Open the liftgate. See Liftgate .
A. Push Pin
B. Taillamp Cover
2. Pull on push pin (A) to release the taillamp cover (B).
3. Remove the taillamp cover ...






