Storing Button Memory Positions

To save positions into Button Memory:

1. Adjust the driver seat, seatback recliner, both outside mirrors, and adjustable pedals, if available, to the desired driving positions.
2. Press and hold MEM (Memory) and “1” at the same time until a beep sounds.
3. Repeat Steps 1 and 2 for a second driver using “2.”

    See also:

    Jump Starting
    For more information about the vehicle battery, see Battery. If the vehicle battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use t ...

    PARKING ASSIST OFF
    After the vehicle has been started, this message displays to remind the driver that the URPA system has been turned off. This message also displays when there is a temporary condition causin ...

    Trunk (Sedan, Coupe)
    WARNING! Exhaust gases can enter the vehicle if it is driven with the liftgate or trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or ...