Vehicle Speed Messages
SELECTED SPEED LIMIT EXCEEDED
This message is displayed when the vehicle speed is greater than the set speed. See "Speed Warning" under Driver Information Center (DIC).
See also:
Shutting the Engine Off After a Remote Start
To cancel a remote start, do any of the following:
- Press until the parking lamps turn off.
- Turn on the hazard warning flashers.
- Turn the vehicle on and then back off. ...
Steps for Determining Correct Load Limit
1. Locate the statement “The combined weight of occupants and cargo should
never exceed XXX kg or XXX lbs” on your vehicle's placard.
2. Determine the combined weight of the driver and passengers ...
Turning the System On and Off
The system can be disabled through
the Driver Information Center (DIC).
See “Parking Assist” under Driver
Information Center (DIC) for more information.
URPA defaults to the on setting
each ti ...