Exit Lighting
This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside.
Press the MENU/SELECT knob when Exit Lighting is highlighted.
Turn the knob to select Off, 30 Seconds, 1 Minute, or 2 Minutes.
Press the knob to confirm and go back to the last menu.
See also:
Turning the System On and Off
The UFRPA system can be turned on and off by pressing the park assist button
located next to the shift lever.
The LED next to the park assist button lights up when the system is on and
turns ...
Programming the Power Windows
Programming the power windows may be necessary if the vehicle's battery has
been disconnected or discharged.
If the window will not express up after power has been restored and a
message is displ ...
Resuming a Set Speed
If the cruise control is set at a desired speed and then the brakes are applied,
the cruise control is disengaged without erasing the set speed from memory.
Once the vehicle speed reaches about 40 ...