Reading Lamps
There are reading lamps located on the overhead console and over the rear passenger doors. These lamps come on automatically when any door is opened.
To manually turn the reading lamps on or off:
- Press next to each overhead console reading" width=62 height=19 id="_x0000_i1370"
src="images/books/1183/3/index.104.gif" border=0>next to each overhead console reading
lamp.
- Press the lamp lens on the rear passenger reading lamps.
See also:
Starting the Engine Using Remote Start
1. Press and release on the RKE transmitter.
2. Within two seconds, press and hold until the turn signal lamps flash. This
confirms the request to remote start the vehicle has been received. If the
...
How the System Works
URPA comes on automatically
when the shift lever is moved into
R (Reverse). A single tone sounds
to indicate the system is working.
URPA operates only at speeds less
than 8 km/h (5 mph).
An ...
Driving for Better Fuel Economy
Driving habits can affect fuel mileage. Here are some driving tips to get
the best fuel economy possible.
- Avoid fast starts and accelerate smoothly.
- Brake gradually and avoid abrupt stops.
- ...