Entry Lighting
The headlamps, taillamps, license plate lamps, back—up lamps, dome lamps,
and most of the interior lights turn on briefly, when 
is pressed on the Remote" width=18 height=20
id="_x0000_i1371" src="images/books/1183/1/index.41.gif" border=0>is pressed on the Remote
Keyless Entry (RKE) transmitter, or when the door handle is pulled. After about
30 seconds the exterior lamps turn off, and then the dome and remaining
interior lights dim to off. The entry lighting can be manually turned off by
changing the ignition out of the off position, or by pressing 
on the RKE" width=15
height=20 id="_x0000_i1372" src="images/books/1183/1/index.39.gif" border=0>on the RKE
transmitter.
This feature can be changed.
See Vehicle Personalization.
See also:
Timer
This display can be used as a timer. To start the timer, press SET/CLR while
Timer is displayed.
The display will show the amount of time that has passed since the timer was
last reset. To stop t ...
How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
A. Drain Plug
B. Fill Plug
If the level is below the bottom of the fill plug hole, located on the transfer
case, some lubri ...
Recommended Fluids and Lubricants
Fluids and lubricants identified below by name, part number, or specification
can be obtained from your dealer.
...