XM Categories

XM channels are organized in categories.

Removing or Adding Categories

Channels in a category that have been removed can still be accessed by using the border=0>SEEK orSEEK or src=SEEK buttons, or the TUNE knob." width=29 height=18 id="_x0000_i1431" src="images/books/1183/4/index.5.gif" border=0>SEEK buttons, or the TUNE knob.

To add or remove categories:

1. Press the CONFIG button.
2. Select Radio Settings.
3. Select XM Categories.
4. Turn the MENU/SELECT knob to highlight the category.
5. Press the MENU/SELECT knob to remove or add the category.

    See also:

    Tips and Troubleshooting
    IR Sensor Inoperative: Check that the batteries are good in the remote control. Check that the remote Control IR Sensor is not blocked. Aim the remote control toward the IR Sensor being controlled ...

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working. URPA operates only at speeds less than 8 km/h (5 mph). An obstac ...

    Selecting the Right Engine Oil
    Selecting the right engine oil depends on both the proper oil specification and viscosity grade. See Recommended Fluids and Lubricants. ...