Selecting an XM Channel
XM channels can be selected by using SEEK," width=28 height=20
id="_x0000_i1432" src="images/books/1183/4/index.4.gif" border=0>SEEK,
SEEK, the TUNE" width=29
height=18 id="_x0000_i1433" src="images/books/1183/4/index.5.gif" border=0>SEEK, the TUNE
knob, or the menu system.
Selecting a Channel Using SEEK or" width=28 height=20 id="_x0000_i1434"
src="images/books/1183/4/index.4.gif" border=0>SEEK or
SEEK (Radio with CD)" width=29 height=18
id="_x0000_i1435" src="images/books/1183/4/index.5.gif" border=0>SEEK (Radio with CD)
- Press and release SEEK or" width=28 height=20 id="_x0000_i1436"
src="images/books/1183/4/index.4.gif" border=0>SEEK or
SEEK to go to the" width=29 height=18
id="_x0000_i1437" src="images/books/1183/4/index.5.gif" border=0>SEEK to go to the
previous or next channel.
- Press and hold SEEK or" width=28 height=20 id="_x0000_i1438"
src="images/books/1183/4/index.4.gif" border=0>SEEK or
SEEK to scroll through" width=29 height=18
id="_x0000_i1439" src="images/books/1183/4/index.5.gif" border=0>SEEK to scroll through
the previous or next channel until the channel is reached.
Selecting a Channel Using g SEEK or" width=28 height=20 id="_x0000_i1440"
src="images/books/1183/4/index.4.gif" border=0> SEEK or
SEEK (Radio with" width=29 height=18
id="_x0000_i1441" src="images/books/1183/4/index.5.gif" border=0>SEEK (Radio with
CD/DVD and MEM)
Press and release SEEK or" width=28 height=20 id="_x0000_i1442"
src="images/books/1183/4/index.4.gif" border=0>SEEK or
SEEK to go to the" width=29 height=18
id="_x0000_i1443" src="images/books/1183/4/index.5.gif" border=0>SEEK to go to the
previous or next channel.
Selecting a Channel Using the TUNE Knob
To select an XM channel using the TUNE knob:
Turn the TUNE knob to highlight an XM channel; the channel is selected after a short delay.
To select a channel using the menu:
1. Turn the MENU/Select knob and select Channel List.
2. Select the desired channel.
Selecting a Channel Using the Menu System
1. Turn the MENU/SELECT knob.
2. Select XM Category List.
3. Select the category.
4. Select the channel.
See also:
Protecting Exterior Bright
Metal Parts
Regularly clean bright metal parts
with water or chrome polish on
chrome or stainless steel trim,
if necessary.
For aluminum, never use auto or
chrome polish, steam, or caustic
soap to clea ...
Installing the Third Row Seat
To install the seat:
1. Open the liftgate to access the rear of the vehicle.
2. Slide the front outboard seat wheels into the track on the floor and roll
the seat forward. The front latches should ...
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system
overload.
When the current electrical load is too heavy, the circuit breaker opens and
closes, protecting the ci ...