Battery Replacement
To change the batteries:
1. Loosen the screw to the battery door located on the left side of the
headphones.
2. Slide the battery door open.
3. Replace the two AAA batteries.
4. Replace the battery door and tighten the screw.
Remove the batteries if the headphones are not going to be used for a long period of time.
See also:
MRC, electric power steering and other advanced control systems
Supporting the ATS's new suspension designs are advanced damping, steering
and braking systems, including Magnetic Ride Control.
Magnetic Ride Control (MRC) is the heart of the FE3 Sport Suspensio ...
Certification Label
Label Example
A vehicle-specific Certification
label is attached to either the
driver door edge or the lower
center pillar on the driver side of
the vehicle. The label tells the
gross wei ...
There is also important loading information on the vehicle Certification/Tire
label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight
Rating (GAWR) for the front and r
Steps for Determining Correct Load Limit
1. Locate the statement “The combined weight of occupants and cargo should never
exceed XXX kg or XXX lbs” on your vehicle's placard.
2. Determine the ...






