DVD Display Error Messages

The DVD display error message depends on which radio the vehicle has. The video screen may display one of the following:

Disc Load/Eject Error or Mechanical Error: There are disc load or eject problems.

Disc Format Error or Unknown Format: The disc is inserted with the disc label wrong side up, or the disc is damaged.

Disc Region Error or Disc Error:

The disc is not from a correct region.

No Disc Inserted: No disc is present when the id=or MEM/CD/AUX button is" width=23 height=18 id="_x0000_i1531" src="images/books/1183/4/index.54.gif" border=0>or MEM/CD/AUX button is pressed on the radio.

    See also:

    DVD Distortion
    Video distortion can occur when operating cellular phones, scanners, CB radios, Global Position Systems (GPSs), two-way radios, mobile faxes, or walkie talkies. It might be necessary to turn off ...

    Installing the Third Row Seat
    To install the seat: 1. Open the liftgate to access the rear of the vehicle. 2. Slide the front outboard seat wheels into the track on the floor and roll the seat forward. The front latches should ...

    Steering Wheel Adjustment
    Push the control up or down to tilt the steering wheel up or down. To set the memory position, see Vehicle Personalization  . ...