Call Waiting

Call waiting must be supported on the cell phone and enabled by the wireless service carrier.

- Press border=0>to answer an incoming call when another call is active. The original callto answer an incoming call when another call is active. The original call is placed on hold.
- Press border=0>again to return to the original call.again to return to the original call.
- To ignore the incoming call, no action is required.
- Press border=0>to disconnect the current call and switch to the call on hold.to disconnect the current call and switch to the call on hold.

    See also:

    Door Ajar Messages
    DRIVER DOOR OPEN This message displays and a chime sounds if the driver door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obst ...

    Compass Calibration Procedure
    1. Before calibrating the compass, check that the compass is set to the correct variance zone. See “Compass Variance (Zone) Procedure” earlier in this section. Do not operate any switches ...

    Skip Shift (CTS–V)
    Under light acceleration, the transmission will only allow you to shift from 1 (First) to 4 (Fourth). Shifts from 1 (First) to 2 (Second) or 3 (Third) are not allowed. This helps improve fuel ...