Pairing
A Bluetooth enabled mobile phone must be paired to the UHP system first and then connected to the vehicle before it can be used. See the mobile phone manufacturer's user guide for Bluetooth functions before pairing the mobile phone.
Pairing Information:
- Up to five mobile phones can be paired to the UHP system - The pairing process is disabled when the vehicle is moving - The UHP system connects with the first available paired mobile phone in the order the phone was paired - Only one paired mobile phone can be connected to the UHP system at a time - Pairing should only need to be completed once, unless changes to the pairing information have been made or the mobile phone is deleted
See also:
Removal and Installation of the Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister which is available from your ...
Checking Coolant
The vehicle must be on a level surface when checking the coolant level.
Check to see if coolant is visible in the coolant surge tank. If the coolant
inside the coolant surge tank is boiling, do no ...
Exterior Lamps Off Reminder
If a door is open, a reminder chime sounds when the headlamps or parking lamps
are manually turned on and the key is out of the ignition. To turn off the chime,
turn the headlamp switch to off or ...