See also:

Hitch Cover (with Dual Exhaust)
To remove the hitch cover: 1. Turn the fasteners on the lower tabs 90 degrees counterclockwise. 2. Pull the lower edge of the cover out slightly. 3. Lift the cover up off the upper bracket. To r ...

Recommended Fuel
Use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, an audible knocking noise, commonly referred to as spark knock, might be heard when d ...

Back-Up Lamps
To replace one of these bulbs: 1. Open the liftgate. See Liftgate . A. Push Pin B. Taillamp Cover 2. Pull on push pin (A) to release the taillamp cover (B). 3. Remove the taillamp cover ...