Replacing Safety Belt System Parts after a Crash
WARNING
A crash can damage the safety belt system in the vehicle. A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure the safety belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.
After a minor crash, replacement of safety belts may not be necessary. But the safety belt assemblies that were used during any crash may have been stressed or damaged. See your dealer to have the safety belt assemblies inspected or replaced.
New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash.
Have the safety belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light .
See also:
Remote Keyless Entry (RKE) System
See Radio Frequency Statement for information
regarding Part 15 of the Federal
Communications Commission (FCC)
rules and Industry Canada
Standards RSS-GEN/210/220/310.
If there is a decrease ...
Reverse Tilt Mirrors
If the vehicle is equipped with memory mirrors, there is an option to have
the mirrors tilt down, when in R (Reverse), to more easily see the ground near
the vehicle.
When the vehicle is shifted ...
Locking Rear Axle
Vehicles with a locking rear axle can give more traction on snow, mud, ice, sand,
or gravel. It works like a standard axle most of the time, but when traction is
low, this feature will allow the r ...






