Exiting the Feature Settings Menu
The feature settings menu will be exited when any of the following occurs:
- The vehicle is no longer in ON/RUN.
- The trip/fuel or vehicle information DIC buttons are pressed.
- The end of the feature settings menu is reached and exited.
- A 40-second time period has elapsed with no selection made.
See also:
Rear Compartment Fuse Block
The rear compartment fuse block is located in the cargo area, on the driver
side of the vehicle behind the lower trim panel. To open, turn the latch with a
flat bladed tool and pull the trim pan ...
When the System Does Not
Seem to Work Properly
The following messages may be
displayed on the DIC:
PARKING ASSIST OFF: This
message occurs if the driver
disables the system or if vehicle is
driven above 8 km/h (5 mph) in
R (Reverse).
S ...
Shutting the Engine Off After a Remote Start
To manually shut off the engine after
a remote start, do any of the
following:
- Press until the parking lamps
turn off.
- Turn on the hazard warning
flashers.
- Turn the ignition switch o ...