Headlamp High/Low-Beam Changer

To change the headlamps from low to high beam, push the lever toward the instrument (Headlamp High/Low Beam Changer): To change the headlamps from low to high beam, push the lever toward the instrument panel. To return to low-beam headlamps, pull the multifunction lever toward you. Then release it.

When the high beams are on, this indicator light on the instrument panel cluster

When the high beams are on, this indicator light on the instrument panel cluster will also be on.

    See also:

    Driving Characteristics and Towing Tips
    WARNING The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly. For example, if the trailer is too heavy, the brakes may not ...

    SERVICE ALL WHEEL DRIVE
    This message displays if a problem occurs with the All-Wheel Drive (AWD) system. The vehicle will run in 2WD. This could be caused by: - An electronics problem - An AWD system oil overheat - ...

    Under the Hood
    The Escalade ESV uses the same engine as does the regular Escalade: a 6.2-liter V-8 with 403 horsepower and 417 pounds-feet of torque. It works through a six-speed automatic transmission. Towing ...