Headlamp Wiring
An electrical overload may cause the lamps to go on and off, or in some cases to remain off. Have the headlamp wiring checked right away if the lamps go on and off or remain off.
See also:
Battery Power Protection
This feature shuts off the dome lamps if they are left on for more than 10 minutes
when the ignition is in LOCK/OFF. This helps to prevent the battery from running
down. ...
EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and
hold the brake pedal, and push down momentarily on the EPB switch. If you
attempt to release the EPB without the brake pedal ...
Starting Procedure
1. With your foot off the accelerator
pedal, turn the ignition key to
START. If the vehicle has the
keyless access system, push the
ignition control knob in and
rotate the knob to the START ...