Canceling a Remote Start

To cancel a remote start:

- Aim the RKE transmitter at the vehicle and press and hold until the parking lamps turn off. until the parking lamps turn off.

- Turn on the hazard warning flashers.

- Turn the vehicle on and then off.

See Remote Vehicle Start.

    See also:

    Programming with a Recognized Transmitter (Keyless Access Vehicles Only)
    A new transmitter can be programmed to the vehicle when there is one recognized transmitter. To program, the vehicle must be off and all of the transmitters, both currently recognized and new, mu ...

    SERVICE ALL WHEEL DRIVE
    This message displays if a problem occurs with the All-Wheel Drive (AWD) system. The vehicle will run in 2WD. This could be caused by: - An electronics problem - An AWD system oil overheat - ...

    Storing the Tire Sealant and Compressor Kit (Sedan)
    The tire sealant and compressor kit is located in the trunk in one of the following locations. A. Tire Sealant and Compressor Kit B. Foam Container C. Wing Nut 1. Open the trunk. See Trunk ...