StabiliTrak® System

StabiliTrak assists with directional control of the vehicle in difficult driving conditions. The system turns on automatically every time the vehicle is started.

- To turn off both traction control and electronic stability control, press and hold the TCS/StabiliTrak button located on the instrument panel located on the instrument panel (CTS) or steering wheel (CTS-V) until appropriate DIC messages are illuminates and the appropriate DIC messages are displayed. See Ride Control System Messages.

- Press the TCS/StabiliTrak button systems. again to turn on both systems.

For more information, see StabiliTrak® System.

    See also:

    Brake System Messages
    BRAKE FLUID LOW This message is displayed when the brake fluid level is low. See Brake Fluid. BRAKES OVERHEATED This message is displayed when the brakes are becoming overheated. You may ...

    When the System Does Not Seem to Work Properly
    The following messages may be displayed on the DIC: SERVICE PARKING ASSIST: If this message occurs, take the vehicle to your dealer to repair the system. PARK ASSIST OFF: If the UFRPA system ...

    Tire and Loading Information Label
    Label Example A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock ...