Programming Transmitters to the Vehicle
Only RKE transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer.
When the replacement transmitter is programmed to the vehicle, all remaining transmitters must also be programmed. Any lost or stolen transmitters no longer work once the new transmitter is programmed.
Each vehicle can have up to eight transmitters programmed to it.
See also:
Turn Signals When Towing a Trailer
The turn signal indicators on the instrument panel flash whenever signaling
a turn or lane change.
Properly hooked up, the trailer lamps also flash, telling other drivers the
vehicle is turning, ...
Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is attached to the center
pillar (B-pillar). With the driver door open, you will find the label attached below
the door lock ...
Automatic EPB Release
The EPB will automatically release if the vehicle is running, placed into
gear, and an attempt is made to drive away. Avoid rapid acceleration when the
EPB is applied, to preserve parking brake lini ...