Keyless Unlocking
With the keyless access transmitter within 1m (3 ft), approach the front door and pull the handle to unlock and open the door. On some models there is a touch sensor on the door handle. If the transmitter is recognized, the door will unlock and open.
To access the rear doors first, pull the rear door handle once to unlock all doors and a second time to open the door.
Entering any door other than the driver door will cause all of the doors to unlock. This is not customizable.
To customize which doors unlock when the driver door is opened, see “Keyless Unlock” under Vehicle Personalization.
See also:
Starting the Engine Using Remote Start
1. Press and release on the RKE transmitter.
2. Within two seconds, press and hold until the turn signal lamps flash. This
confirms the request to remote start the vehicle has been received. If the
...
EPB Apply
The EPB can be applied any time the vehicle is stopped. The EPB is applied
by momentarily lifting up on the EPB switch. Once fully applied, the parking
brake status light will be on. While the brake ...
Immobilizer
See Radio Frequency Statement for information regarding Part 15 of the
Federal Communications Commission (FCC) rules and Industry Canada Standards
RSS-GEN/210/220/310. ...






