Replacing Airbag System Parts after a Crash
WARNING!
A crash can damage the
airbag systems in the vehicle.
A damaged airbag system may
not work properly and may
not protect you and your
passenger(s) in a crash, resulting
in serious injury or even death.
To help make sure the airbag
systems are working properly
after a crash, have them
inspected and any necessary
replacements made as soon as
possible.
If an airbag inflates, you will need to replace airbag system parts.
See your dealer for service.
If the airbag readiness light stays on after the vehicle is started or comes on when you are driving, the airbag system may not work properly.
Have the vehicle serviced right away. See Airbag Readiness Light.
See also:
Shutting the Engine Off After a Remote Start
To manually shut off the engine after
a remote start, do any of the
following:
- Press until the parking lamps
turn off.
- Turn on the hazard warning
flashers.
- Turn the ignition switch o ...
Programming without a Recognized Transmitter (Keyless Access Vehicles Only)
If there are no currently recognized transmitters available, follow this
procedure to program up to eight transmitters. This feature is not available in
Canada. This procedure will take approximatel ...
Instrument Panel Fuse Block
The instrument panel fuse block is located in the center console between the
driver and passenger seats. To access the fuses, open the fuse panel door from
the passenger side by pulling it out.
...






