Parking Assist
If the vehicle has the Ultrasonic Rear Parking Assist (URPA) system, this display allows the system to be turned on or off. Once in this display, press the set/reset button to select between On or Off.
The URPA system automatically turns back on after each vehicle start. When the URPA system is turned off and the vehicle is shifted out of P (Park), the DIC displays the PARKING ASSIST OFF message as a reminder that the system has been turned off. See Object Detection System Messages and Ultrasonic Parking Assist for more information.
See also:
Distance to Destination
This display will show the vehicle distance with estimated time of arrival
to destination. The value can be cleared or reset by pressing the SET/CLR
button. Move the thumbwheel up or down to increas ...
How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
A. Drain Plug
B. Fill Plug
If the level is below the bottom of the fill plug hole, located on the transfer
case, some lubri ...
Selecting a Band
Press the RADIO/BAND button to choose AM, FM, or XM, if equipped.
The last station that was playing starts playing again. ...