Blank Display

This display shows no information.

    See also:

    Back-Up Lamps
    To replace this bulb: 1. Open the liftgate. See Liftgate   for more information. 2. Remove the two screws from the taillamp assembly. 3. Pull the taillamp assembly rearward until the ...

    Safety Chains
    Always attach chains between the vehicle and the trailer. Cross the safety chains under the tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated ...

    STABILITRAK NOT READY
    This message may display after first driving the vehicle and exceeding 30 km/h (19 mph) for 30 seconds. The TCS/StabiliTrak warning light on the instrument panel cluster also comes on. The St ...