Connecting to a Different Phone
To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times.
1. Press and hold 
for
two seconds. For vehicles
with a navigation system say
“Hands Free” after the tone.
2. Say “Bluetooth.” 3. Say “Change phone.” . If another phone is found, the response will be “<Phone name> is now connected.” . If another phone is not found, the original phone remains connected.
See also:
When to Add Engine Oil
If the oil is below the cross-hatched area at the tip of the dipstick, add 1
L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right
Engine Oil” in this section for ...
Active Fuel Management®
Vehicles with V8 engines may have Active Fuel Management™. This system allows
the engine to operate on either all or half of its cylinders, depending on the driving
conditions. When less power is ...
When the System Does Not Seem to Work Properly
The following messages may be displayed on the DIC:
SERVICE PARKING ASSIST:
If this message occurs, take the vehicle to your dealer to repair the system.
PARK ASSIST OFF: If the UFRPA system ...