Viscosity Grade
SAE 5W–30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W–30, 10W–40, or 20W–50.
If in an area of extreme cold, where the temperature falls below −20°F (−29°C), an SAE 0W–30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
When selecting an oil of the appropriate viscosity grade, always select an oil that meets the dexos1 specification or equivalent. See “Specification” for more information.
See also:
Install the Cargo Cover
1. Hold the cartridge so that the pull-out shade faces the rear of the
vehicle.
2. Align the cartridge over the pins on the trim panels of the vehicle.
3. Push down on the cartridge to snap i ...
Cargo Tie-Downs
For vehicles equipped with cargo tie—downs, the four tie-downs are located
in the rear compartment of the vehicle. Use the tie-downs to secure small
loads. ...
Turn and Lane-Change Signals
An arrow on the instrument panel cluster will flash in the direction of the
turn or lane change.
Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the a ...