Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.
- The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).
- With the key access ignition system, the ignition key should come out only in LOCK/OFF.
See Ignition Positions (Key Access) or Ignition Positions (Keyless Access).
Contact your dealer if service is required.
See also:
Using the Navigation System
This section presents basic information needed to operate the navigation system.
Use the buttons located on the navigation system along with the available touch-sensitive
screen buttons on the navi ...
Transmission
Driver Shift Control (DSC)
The DSC switch is located on the shift lever.
To enable the DSC feature:
1. Move the column shift lever to the M(Manual) position. The Driver Information
Center (DIC) ...
Battery Replacement
Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in
the DIC. See “REPLACE BATTERY IN REMOTE KEY” under Key and Lock Messages for additional information.
Notice: ...






