High Intensity Discharge (HID) Lighting
WARNING!
The low beam high intensity
discharge lighting system
operates at a very high voltage.
If you try to service any of the
system components, you could be
seriously injured. Have your
dealer or a qualified technician
service them.
After an HID headlamp bulb has been replaced, the beam might be a slightly different shade than it was originally. This is normal.
See also:
California Fuel Requirements
If the vehicle is certified to meet California Emissions Standards, it is
designed to operate on fuels that meet California specifications.
See the underhood emission control label. If this fuel i ...
How the System Works
URPA comes on automatically when the shift lever is moved into R (Reverse). A
single tone sounds to indicate the system is working.
URPA operates only at speeds less than 8 km/h (5 mph).
An obstac ...
Hitch Cover (without Dual Exhaust)
The vehicle may have a hitch cover. To remove the hitch cover:
1. Turn the fasteners on the lower tabs 90 degrees counterclockwise.
2. Lift the lower edge of the cover about 45 degrees.
3. Pull t ...






