Obstacle Detection Feature
The Obstacle Detection Feature is part of the express-up feature and is active:
- In the middle and upper portions of the window opening.
- During window up movements.
- In ignition OFF during all window up movements and during express-up window
movements in ignition ON/RUN/START.
If there is something blocking the window during automatic closing, the window will reverse direction for a short distance. Weather conditions such as extreme cold and/or ice may cause the window to auto-reverse. The window will return to normal operation once the object or condition is removed.
If conditions prevent the window from closing and the window continues to auto-reverse, it is possible to close the window with the ignition in ON/RUN/START by holding the window switch in the partially or fully pulled up position.
Release of the switch from the partially pulled up position will cause the window to stop. Release of the switch from the fully pulled up position will activate the express-up and related obstacle detection features.
See also:
Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order
to get an accurate reading, the vehicle must be on level ground.
The engine oil dipstick handle is a yellow loop. See En ...
Preset Destination
The preset destination entry method lets you set a destination by selecting from
one of five previously stored destinations. Besides voice tagged destinations, these
are the only destinations avai ...
Why Safety Belts Work
When riding in a vehicle, you travel
as fast as the vehicle does. If the
vehicle stops suddenly, you keep
going until something stops you.
It could be the windshield, the
instrument panel, ...






