Rear Window Wiper/Washer
The rear wiper controls are on the end of the windshield wiper lever.

ON: Press the upper portion of the button for continuous rear window wipes.
OFF: The rear wiper turns off when the button is returned to the middle position.
INT (Intermittent Rear Wipes):
Press the lower portion of the button to set a delay between wipes.
(Rear Washer): Push the windshield wiper lever forward to spray washer
fluid on the rear window. The lever automatically returns to its original
position when released.
Reverse Gear Wipes
If the rear wiper control is off, the rear wiper will automatically operate continuously when the shift lever is in R (Reverse), and the front windshield wiper is performing low or high speed wipes. If the rear wiper control is off, the shift lever is in R (Reverse), and the front windshield wiper is performing interval wipes, then the rear wiper automatically performs interval wipes.
This feature can be changed.
See Vehicle Personalization.
The windshield washer reservoir is used for the windshield and the rear window. Check the fluid level in the reservoir if either washer is not working. See Washer Fluid.
See also:
Storing and Deleting Phone
Numbers
The system can store up to
30 phone numbers as name tags
in the Hands-Free Directory that is
shared between the Bluetooth and
OnStar systems.
The following commands are used
to delete and s ...
Side Bolster
To adjust the side bolster support,
if equipped:
- Press the top or bottom of the
control (A) to increase or
decrease support in the seat
cushion bolsters.
- Press the top or bottom of the
...
Express Window Anti-Pinch Override
WARNING!
If express override is activated,
the window will not reverse
automatically. You or others could
be injured and the window could
be damaged. Before you use
express override, make s ...






