High-Beam On Light

border=0>

This light comes on when the high-beam headlamps are in use.

See Headlamp High/Low-Beam Changer for more information.

    See also:

    Daytime Running Lamp (DRL) (Uplevel)
    1. From the back side of the headlamp assembly, remove the bottom cap to replace the DRL bulb. 2. Disconnect electrical connector. 3. Remove the DRL bulb socket from the headlamp assembly. 4. ...

    SERVICE STABILITRAK
    This message displays if there has been a problem detected with the StabiliTrak® system. The TCS/StabiliTrak warning light on the instrument panel cluster also comes on. If this message come ...

    Turn and Lane-Change Signals
    An arrow on the instrument panel cluster will flash in the direction of the turn or lane change. Move the lever all the way up or down to signal a turn. Raise or lower the lever until the a ...