Air Quality Sensor
This will allow you to select whether the system will operate at high or low sensitivity. Only vehicles with the dual zone climate control will have this option.
Press the MENU/SELECT knob when Air Quality Sensor is highlighted to open the menu.
Turn the knob to highlight High or Low Sensitivity. Press the knob to confirm the selection and move back to the last menu.
See also:
Programming with a Recognized Transmitter (Keyless Access Vehicles Only)
A new transmitter can be programmed to the vehicle when there is one
recognized transmitter.
To program, the vehicle must be off and all of the transmitters, both
currently recognized and new, mu ...
Park Brake and P (Park)
Mechanism Check
WARNING!
When you are doing this check,
the vehicle could begin to move.
You or others could be injured
and property could be damaged.
Make sure there is room in front
of the vehicle in case ...
Removing the Flat Tire and
Installing the Spare Tire
1. Do a safety check before
proceeding. See If a Tire
Goes Flat
2. Use the wrench to loosen all of
the wheel nuts. Do not remove
them yet.
3. Find the jacking location using
the diagra ...






