See also:

Compass Calibration Procedure
1. Before calibrating the compass, check that the compass is set to the correct variance zone. See “Compass Variance (Zone) Procedure” earlier in this section. Do not operate any switches ...

STABILITRAK OFF
This message displays when you turn off StabiliTrak, or when the stability control system has been automatically disabled. The TCS/StabiliTrak warning light on the instrument panel cluster al ...

Ending Cruise Control
There are three ways to end cruise control: To disengage cruise control, step lightly on the brake pedal. Press on the steering wheel. To turn off the cruise control, press on the steering ...