Voice Recognition
The voice recognition system uses commands to control the system and dial phone numbers.
Noise: The system may not recognize voice commands if there is too much background noise.
When to Speak: A tone sounds to indicate that the system is ready for a voice command.Wait for the tone and then speak.
How to Speak: Speak clearly in a calm and natural voice.
See also:
Tires
Use a stiff brush with tire cleaner to
clean the tires.
Notice: Using petroleum-based
tire dressing products on the
vehicle may damage the paint
finish and/or tires. When applying
a tire dr ...
Compass Calibration Procedure
1. Before calibrating the compass,
check that the compass is set
to the correct variance zone.
See “Compass Variance (Zone)
Procedure” earlier in this
section.
Do not operate any switches
...
Head Restraint Removal and Reinstallation
The rear outboard head restraints can be removed if they interfere with the
proper installation of the child restraint. The headrest in the rear center
seating position is not removable and should b ...