See also:

Back-Up Lamps
To replace this bulb: 1. Open the liftgate. See Liftgate   for more information. 2. Remove the two screws from the taillamp assembly. 3. Pull the taillamp assembly rearward until the ...

EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake pedal ...

Storing a Flat or Spare Tire and Tools
Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in t ...