Removal and Installation of the Sealant Canister

To remove the sealant canister:

1. Unwrap the sealant hose.
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister which is available from your dealer.
5. Push the new canister into place.

    See also:

    Conditions in Which Remote Start Will Not Work
    The remote start will not operate if any of the following occur: - The ignition is in any mode other than OFF. - The transmitter is in the vehicle. - The hood is not closed. - The hazard warning ...

    DIC Compass
    The vehicle may have a compass in the Driver Information Center (DIC). See Compass for information. ...

    Ultrasonic Parking Assist
    If available, Ultrasonic Rear Parking Assist (URPA) system uses sensors on the rear bumper to assist with parking and avoiding objects while in R (Reverse). It operates at speeds less than 8 ...