Storing Memory Positions
To save into memory:
1. Adjust the driver seat, including the seatback recliner and lumbar, both outside mirrors, power steering column, and the throttle and brake pedals.
See Power Mirrors , Steering Wheel Adjustment , and Adjustable Throttle and Brake Pedal .
Not all mirrors and adjustable throttles and brake pedals will have the ability to save and recall their positions.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.”
To recall, press and release “1” or “2.” The vehicle must be in P (Park). A single beep will sound. The seat, outside mirrors, steering column, and adjustable throttle and brake pedals will move to the positions previously stored for the identified driver.
See Memory Seats and Vehicle Personalization .
See also:
Wiper Blade Replacement
Windshield wiper blades should be
inspected for wear or cracking.
See Maintenance Schedule.
It is a good idea to clean or replace
the wiper blade assembly on a
regular basis or when worn.
For ...
General Information
Your vehicle is an important investment. This section describes the required
maintenance for the vehicle. Follow this schedule to help protect against major
repair expenses resulting from neglect or ...
Dome Lamps
The dome lamp controls are located in the overhead console.
To change the dome lamp settings, press the following:
: Turns the lamp off, even when a door is open.
: The lamp comes on auto ...