Storing Memory Positions
To save into memory:
1. Adjust the driver seat, including the seatback recliner and lumbar, both outside mirrors, power steering column, and the throttle and brake pedals.
See Power Mirrors , Steering Wheel Adjustment , and Adjustable Throttle and Brake Pedal .
Not all mirrors and adjustable throttles and brake pedals will have the ability to save and recall their positions.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.”
To recall, press and release “1” or “2.” The vehicle must be in P (Park).
A single beep will sound. The seat, outside mirrors, power steering column, and adjustable throttle and brake pedals will move to the positions previously stored for the identified driver.
See also:
Removing the Spare Tire and
Tools (Wagon)
A. Wing Nut
B. Spare Tire
C. Jack
D. Subwoofer (If Equipped)
E. Wheel Wrench (Two-Piece Shown, Three-Piece Similar)
F. Extension (If Equipped)
G. Cable
To access the spare tire and jacking ...
After Off-Road Driving
Remove any brush or debris that has collected on the underbody or chassis, or
under the hood. These accumulations can be a fire hazard.
After operation in mud or sand, have the brake linings cleane ...
Remote Vehicle Start
With this feature the engine can be started from outside of the vehicle.
Starting the Vehicle
1. Press and release on the RKE transmitter.
2. Within two seconds, press and hold until the turn s ...