Removing the Third Row Seat
To remove the seat:
1. Open the liftgate to access the controls for the seat.
2. Fold the seatbacks forward using lever “1” and the instructions listed previously under “Folding the Seatback.” The seat cannot be unlatched from the floor unless the seatback is folded.
3. Unlatch the seat from the floor by pulling the handle at the rear of the seat “3 Removal Only” toward the rear of the vehicle.
4. Roll the seat out of the vehicle. There is a track in the floor to guide the seat wheels out of the vehicle.
See also:
Rainsense™
For vehicles with Rainsense, a sensor located near the top center of the
windshield detects the amount of water on the windshield and automatically
controls the frequency of the windshield wiper.
...
Programming with a Recognized Transmitter
A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
For vehicles sold in Canada, two
recognized transmitters are required
to program a new transmitter ...
Daytime Running Lamp (DRL) (Uplevel)
1. From the back side of the headlamp assembly, remove the bottom cap to
replace the DRL bulb.
2. Disconnect electrical connector.
3. Remove the DRL bulb socket from the headlamp assembly.
4. ...