If the On Indicator is Lit for a Child Restraint

If a child restraint has been installed and the on indicator is lit:

1. Turn the vehicle off.

2. Remove the child restraint from the vehicle.

3. Remove any additional items from the seat such as blankets, cushions, seat covers, seat heaters, or seat massagers.

4. Reinstall the child restraint following the directions provided by the child restraint manufacturer and refer to Securing Child Restraints (Rear Seat Position)   or Securing Child Restraints (Right Front Seat Position)   or Securing Child Restraints (Center Front Seat Position)  .

5. If, after reinstalling the child restraint and restarting the vehicle, the on indicator is still lit, turn the vehicle off. Then slightly recline the vehicle seatback and adjust the seat cushion, if adjustable, to make sure that the vehicle seatback is not pushing the child restraint into the seat cushion.

Also make sure the child restraint is not trapped under the vehicle head restraint. If this happens, adjust the head restraint. See Head Restraints  .

6. Restart the vehicle. The passenger sensing system may or may not turn off the airbag for a child in a child restraint depending upon the child’s seating posture and body build. It is better to secure the child restraint in a rear seat.

    See also:

    Extending Engine Run Time
    For a 10-minute extension, repeat Steps 1 and 2 while the engine is still running. The remote start can only be extended once. When the remote start is extended, the second 10-minute period will s ...

    Conditions in Which Remote Start Will Not Work
    The remote start will not operate if any of the following occur: - The ignition is in any mode other than OFF. - The transmitter is in the vehicle. - The hood is not closed. - The hazard warning ...

    Driving on Wet Roads
    Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and ...