See also:

Back-Up Lamps
To replace this bulb: 1. Open the liftgate. See Liftgate   for more information. 2. Remove the two screws from the taillamp assembly. 3. Pull the taillamp assembly rearward until the ...

STABILITRAK OFF
This message displays when you turn off StabiliTrak, or when the stability control system has been automatically disabled. The TCS/StabiliTrak warning light on the instrument panel cluster al ...

Turn Signal Lamps
To replace one of these bulbs: 1. Open the liftgate. See Liftgate . A. Push Pin B. Taillamp Cover 2. Pull on push pin (A) to release the taillamp cover (B). 3. Remove the taillamp cover ...